Aktueller Inhalt von krist

Hello Markus, Thanks for the anwer. But I have a bigger problem with the I2C lines not working. I bought a new mower motor and will use this one. I only have to do a bit more mechanics. But it is worth trying

I am building the Ardumower system with a Ardumower version 1.3 mainboard and an ArduinoDue. But this is not completely working, I have a problem with the I2C on the board: It does not seems to find the RTC clock. I checked the Ardino due on the SCL/ SDA ports (pins20 and 21) with an...

I think of using a level shift board between the Arduino Uno which is using 3V3 and the DLDC board using 5V. Boards like this: https://www.martoparts.nl/4-weg-logic-level-converter. Somebody who has some information about these boards? More info about level shifting...

Hello Guys, Thanks for the answers. I did a test with this motor and driver board but I cannot get it running. There is still something wrong. I am not sure if I have to connect the Hall sensors somewhere to get it running. Or there is something wrong with the chinese board. An option for 3...

Hello, thank you for reading my post. I am rebuilding a defective Stiga Robot mower with the Ardumower project . I replaced the mainboard and the wheel motors. But I should like to re use the existing mower motor because it is difficult to replace it with a single phase DC motor. The mower...